Everyone is already very familiar with rockwool insulation materials, and rockwool insulation is also widely used in construction projects. So what should be paid attention to when constructing rockwool insulation?

     Before the construction of rockwool insulation, it is necessary to make the base wall and its cement mortar smooth, and also install the embedded parts. And it is also necessary to gather all necessary construction machinery and labor protection equipment.
     Of course, construction personnel also need to ensure the solid, flat, and dry surface of the base wall, and there should be no cracking or hollowing. And for the construction of rockwool insulation for external wall insulation, the temperature of the base layer and construction environment should not be lower than 5 degrees Celsius, and construction cannot be carried out on windy or rainy days. And rock wool construction personnel need to wear good labor protection equipment, and ensure construction safety.
     If any detachment of the veneer layer is found during the construction process, it is necessary to take timely measures to bond or fix it with anchors, and to construct the veneer layer in a timely manner.
     After pasting the rockwool insulation strip, the surface treatment of the plastering surface of the board should be carried out, and use stainless steel spatula to apply plastering adhesive to the entire surface, and insulation strip should be pressed into the surface fibers of the rockwool insulation board.