Only when the acidity coefficient is more than 1.6, can the products be called stone wool products. And stone wool products used as external wall insulation have higher requirements. Only when its acidity coefficient is more than 1.7, the quality and performance of stone wool for external wall insulation can be guaranteed.

     1. Comparison of chemical composition and acidity coefficient between basalt insulation Stonewool board and slag wool board
     Raw material: SiO2Al2O3CaOMgOFe2O3FeOSiO2+Al2O3+CaO+ MgO+MK
     Basalt: 47.4115.08.026.893.997.3677.324.18
     Diabase 49.3216.619.406.566.04.6581.894.13
     Blast furnace slag from casting industry40～418～1736～426～8—0.6590～950.95
     Blast furnace slag from steel industry38～406～1238～435～12—0.4～0.890～950.95
     Analysis: The chemical composition of blast furnace slag is characterized by the content of SiO2+Al2O3+CaO+MgO as high as 90%~95%, while the content of Fe2O3+FeO is less than 1. The chemical composition of basalt and diabase insulation Stonewool board is characterized by the content of SiO2+Al2O3+CaO+MgO as high as 77%~83%, about 10% lower than that of blast furnace slag, while the average content of Fe2O3+FeO is about 11%, and the maximum content can be as high as 17%. The calculated acidity coefficient MK of basalt stone wool board is more than 1.5 or even more than 2.0, and the acidity coefficient MK of slag stone wool board is about 1.2
     Next issue we will continue to introduce comparison between insulation Stonewool board and slag mineral wool board. Please stay tuned!