This issue we will continue to introduce construction method of stone wool insulation board.

     10. The sticking of stone wool insulation board should adopt strip sticking method or point sticking method, and the glued area should not be less than 50%. After applying the adhesive to the stone wool insulation board, the lower end of the insulation board should be pasted to the base layer first. The stone wool insulation board should be laid horizontally from the bottom to the top, and should be anchored at the same time. The gap between two insulation board shall not be greater than 2mm. If the gap is wider than 2mm, it should be filled with insulation material. The adjacent insulation board should be at the same level, and the height difference between the boards shall not be greater than 1.5mm.
     11. The outlets of all the wall-penetrating pipelines and components should be filled with the same insulation material and be sealed and waterproofed.
     12. If the veneer layer is found to fall off during the construction process, it should be fixed in a timely manner by bonding or anchoring, and the exterior finish layer construction should be carried out in time.
     Next issue we will continue to introduce construction method of stone wool insulation board. Please stay tuned.